Stretton Payne D3 Acoustic Guitar Natural

	0845 226 0380
UK ONLINE GUITAR SHOP	Sales Line 9am-5pm, Mon-Fri

Stretton Payne D3 Acoustic Guitar Natural

The photos and the measurements were taken by us at MusicianShop.com ©.

Available Online - MusicianShop.com

This mid ranged acoustic guitar is fresh off the drawing board from the chaps at Stretton Payne Guitars, with so many mid range acoustics out there we take a closer look at just how Stretton Payne Guitars have pulled out all the stops to make the ultimate mid ranger for the British musician. So the first thing I have noticed is the awesome construction of this guitar, really good build quality and really good cuts of woods used on this guitar, normally finer cuts of wood are saved for the more expensive models of guitar that are being produced within the same factory, not in this case, only the best for all Stretton Payne Guitars. The tone woods that have been selected for the D3 are Rosewood back and sides with a solid Spruce top giving the guitar a great tone, rich and warm in the bottom end, with great harmonically balanced highs. This guitar was designed to be able to cope with every style of music under the sun; it does this with mass enthusiasm, and integrity giving you the ability to further yourself musically. The D3 is finished with wood bindings around the body, gold hardware and a stylish rosette.
Any Measurements are in mm

Body Top Solid Spruce

Body Back Rosewood

Body Sides Rosewood

Neck Mahogany

Finger Board Rosewood

Bridge Rosewood

Frets Before Body 14

Total Frets 20

Hardware Gold

Machine Heads Gold Die-cast

This mid ranged acoustic guitar is fresh off the drawing board from the chaps at Stretton Payne Guitars, with so many mid range acoustics out there we take a closer look at just how Stretton Payne Guitars have pulled out all the stops to make the ultimate mid ranger for the British musician. So the first thing I have noticed is the awesome construction of this guitar, really good build quality and really good cuts of woods used on this guitar, normally finer cuts of wood are saved for the more expensive models of guitar that are being produced within the same factory, not in this case, only the best for all Stretton Payne Guitars. The tone woods that have been selected for the D3 are Rosewood back and sides with a solid Spruce top giving the guitar a great tone, rich and warm in the bottom end, with great harmonically balanced highs. This guitar was designed to be able to cope with every style of music under the sun; it does this with mass enthusiasm, and integrity giving you the ability to further yourself musically. The D3 is finished with wood bindings around the body, gold hardware and a stylish rosette.
Any Measurements are in mm
Body Top	Solid Spruce
Body Back	Rosewood
Body Sides	Rosewood
Neck	Mahogany
Finger Board	Rosewood
Bridge	Rosewood
Frets Before Body	14
Total Frets	20
Hardware	Gold
Machine Heads	Gold Die-cast